Machining the Motor Mount Machining the Tranny Housing Machining the Shift Box Machining the Titanium Shafts Machining the Chassis (Milling) Machining the Chassis (EDMing) Machining the Chassis (Finishing touches) Machining the Shock Mount Arms Machining the Steering Cable Holders Machining the Steering Arm Links Machining the Suspension Arms Machining the Suspension Arm Pivots Machining the Pivot Sleeve Machining the Universal Joint Yokes Machining the Universal Joint Pivots Assembling the Universal Joints Machining the Shock Shaft Blocks Machining the Shock Tube Blocks Machining the Shock Tubes Machining the Shock Tube Adjustment Nuts Machining the Shock Tube End Bushings Machining the Shock Shaft Ends Machining the Shock Shafts Assembling the Shocks Machining the Axle Tube Blocks Machining the Axle Hub Blocks Machining the Axle Pumpkin Housings Machining the Axle Pumpkin Covers Machining the Axle Hubs Assembling the Axles Machining the Titanium Drive Lines Machining the Front Bumper Machining the Rear Bumper Machining the Bead-Lock Rings Machining the Bead-Lock Rims Machining the Roll Cage 02/00 Mods - The Dual Servo Steering 08/00 Mods - The Tranny Mods 08/00 Mods - The Axle and Suspension Mods 11/00 Mods - The Hardened Miter Bevel Gears